濟南飼料機械廠
聯系人：安經理
手機：152-5313-4653
郵箱：347299818@qq.com
地址：濟南市濟北開發區
飼料混合機http://www.rzguanggaowang.com/所用的設備在工作的過程中，需要通過蒸汽來完成相關工序，而蒸汽的控制就是其中的一大難點。只有將蒸汽控制在適當范圍內，飼料顆粒機才能充分利用它來順利的完成制粒作業，得到優質的飼料顆粒。
Mixer equipment used in the course of work, the need to complete the relevant procedures by steam, and steam control is one of a great difficulty. Only the steam control to the extent appropriate, feed particle machine to take full advantage of its successful completion of the granulation operations, get high-quality feed pellets.
飼料混合機http://www.rzguanggaowang.com/蒸汽還是比較強大的，加濕、加熱、蒸煮等都包含在內。目前飼料混合機中比較常用的蒸汽分為自動和人工兩種，人工方式來控制蒸汽的話，效果并不是什么理想，容易出現一些誤差。因此，最好是采用自動控制系統，對飼料混合機中的蒸汽進行調控。系統可以通過相關的氣控原件來控制截止閥的開度，從而直接影響蒸汽的流量，以達到設備作業所需的標準。可見，自動化技術的運用，飼料混合機的蒸汽控制已不成問題。
Mixer steam is still relatively strong, humidification, heating, cooking and so included. At present, more commonly used feed mixer steam into automatic and manual two kinds of artificial means to control the steam, the result is not a perfect, prone to some error. Therefore, the best is the use of automatic control systems, feed mixer steam regulation. System can be controlled by the associated air control opening degree of the original cut-off valve, whereby the
flow of steam directly affect, to achieve the desired device operating standards. Seen, the use of automation technology, feed mixer steam control is not a problem.